(the Save device noise profile as… button, blue disk) in the Device Noise Profile box or select the Profile | Save As… menu item.In the Save device noise profile as dialog box, a default file name is offered that you can change. The default name is based on the device name and device mode when these are available from the EXIF data fields of the analyzed image. If the EXIF data are not available then the default profile name is based on the name of analyzed image file. Use the suggested default or change the name of the file to store the device noise profile. Device noise profiles are saved in *.dnp files.
| File naming considerations |
If you are going to re-use a device noise profile, select a good file name explaining the device name and mode so that you could easily recognize this profile by its file name later on. Alternatively, you can use special folder structuring to keep many device noise profiles arranged according to their device modes. See Preparing a profile set for different device modes : Stage III. Structuring the profile set for additional information. |
Saved noise profile includes complete noise analysis (including both rough and fine-tuning analyses). Therefore, by re-opening the noise profile, you can reproduce exactly the same conditions for image processing later on. Also, you can exchange profiles with Neat Image users.
In addition, the noise profile can contain a noise sample that has been used to build the rough noise profile. You can control whether it is included into the saved profile using the Save noise sample in profile option.